Magnetic Light Bar

⭐IF MODEL IS TINY, SET THE SCALE TO 1000!⭐

There is a glitch that makes models super small…

Here is a light that can be mounted on any metal surface (when magnetic strips are applied)! Easily provide light to a locker, toolbox, or anywhere that needs some more light! All for under 20 dollars!

—

Parts:

• 1 LED (any color, I used white)
• 1 220 ohm resistor (Red, Red, Black, Black, Gold)
• 9V battery clip connector (https://www.amazon.com/Pangda-Connection-Battery-Connector-Buckles/dp/B072Z91Y9H/ref=sr_1_1?keywords=pangda+type+long+cable&qid=1576447615&sr=8-1)
• 2 Prong rocker switch (https://www.amazon.com/QTEATAK-Rocker-Switch-Household-Appliances/dp/B07RNKKRVY/ref=pd_sbs_328_16?_encoding=UTF8&pd_rd_i=B07RNKKRVY&pd_rd_r=116f2e5e-8603-4945-8da6-a3c5cc8568c4&pd_rd_w=2By37&pd_rd_wg=D91RH&pf_rd_p=5873ae95-9063-4a23-9b7e-eafa738c2269&pf_rd_r=JWC3VN13CCKAWFT10A4R&psc=1&refRID=JWC3VN13CCKAWFT10A4R)
• 9V battery
• 3D printed shells

—

Assembly:

• Test ALL connections before soldering
• Using a dremel (or other sander) grind the inside curved ends of the “base”, as they won’t fit immediately after printing. This keeps the “topper” firmly attached. If you don’t sand, the lid WILL NOT fit.

—

Notes:

• Questions can be sent to my profile 🙂