Lantern Flames

Fire/flame lantern.

Things needed to complete this project:

1. Two AA batteries
2. Flame Bulb from Amazon
3. 20mm diameter switch.
4. 3M screws
5. 8x3mm round magnets to attach battery tray. (bottom piece)
   
   to replace batteries without using screwdriver.

6. glue (optional)

   Links:

https://www.amazon.com/gp/product/B0791BWFCL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/Nilight-90013L-Toggle-Control-Warranty/dp/B07T1JG6BD/ref=ac_session_sims_328_3/142-8812471-9077019?_encoding=UTF8&pd_rd_i=B07T1JG6BD&pd_rd_r=47387cf2-50f2-45ed-93dd-1017c1efddda&pd_rd_w=UdZ8V&pd_rd_wg=K0hoo&pf_rd_p=77a86a8c-20b5-42ee-b876-2528db9dcaf2&pf_rd_r=XNMX9RJXY5S1M47YWCDX&psc=1&refRID=XNMX9RJXY5S1M47YWCDX

https://www.amazon.com/uxcell-Negative-Positive-Conversion-Nickeling/dp/B07HRWLWDC/ref=sr_1_10?keywords=AA+battery+connectors&qid=1581819889&s=automotive&sr=1-10

https://www.amazon.com/ELECFIND-Magnets-Magnet-Refrigerator-Permanent/dp/B07DD61G2F/ref=sr_1_1?keywords=8x3mm+magnets&qid=1581820539&s=hi&sr=1-1

Instructions:

Flame LED light bulbs have AC to DC converters on the inside. If you open up and remove the part which screws into the bulb socket, cut the wires soldered to voltage regulator. Those wires can be connected directly to two AA batteries, as they only need 3Volts DC and the light will run for days on two AA batteries.

Good luck with printing.