fbpx
October 31, 2024

Kids Sized Ear Saver

large_preview_146x17x0.9_honeycomb_ear_r

this is a shortened version for anyone who has a 3D printer with a smaller build volume. the original was designed with medical staff in mind, this one is geared more for kids.

printing instructions are the same as the original design,

2-3 perimeters (walls) if your not using a concentric top and bottom pattern

0.4mm nozzle=0.2mm layer height

0.6mm nozle=0.3mm layer height

0.8mm nozzle=0.3mm layer height

This article was first featured at https://ift.tt/2K1clBz on April 12, 2020 at 12:36PM by Cobalt_Prime

%d bloggers like this: